Note your order number in the support request.
You can find order number on your Packing-slip or Order confirmation e-mail.
Proud Supporter of:
Trinity College Fire Fighting Robot Contest.
8623 Mayland Drive
Henrico, VA 23294-4703 USA. Phone: (804) 767-8116 Fax: (804) 747-5303
Hitec 422 series Servo Mounting kit for NXT or EV3
Comes with servo mounting hardware and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT:
HS-422 (90° or 180° or continuous rotation)
HS-HS-425BB (90° or 180° or continuous rotation)
HSR-1422CR (57 oz.in.) Continuous Rotation Servo
This kit does not include servos.
Note the required parts Ensure that you have following:
One of the servos mentioned above
Grommets (Shock isolators) and bushings
Screws, and screwdriver
Nylon adjustable horn bracket, as shown here:
(If your servo does not have this horn, check with your local servo supplier to purchase it separately)
Servo dimensions matching these mounts There are several other servos that will fit these mounts, if you consider using other servos with these mounts, ensure that they meet these dimensions within 0.2 mm tolerance.
A = 19.82mm
B = 13.47mm
C = 33.79mm
D = 10.17mm
E = 9.66mm
F = 30.22mm
G = 11.68mm
H = 26.67mm
J = 52.84mm
K = 9.35mm
L = 4.38mm
M = 39.88mm
X = 3.05mm