Note your order number in the support request.
You can find order number on your Packing-slip or Order confirmation e-mail.
Proud Supporter of:
Trinity College Fire Fighting Robot Contest.
8623 Mayland Drive
Henrico, VA 23294-4703 USA. Phone: (804) 767-8116 Fax: (804) 747-5303
HS311 Continuous Rotation RC Servo with mounting kit for NXT or EV3
This kit is designed to integrate a medium duty Continuous Rotation RC servo motor with your NXT contraptions. It is ideal for medium force movements.
The kit contains HS 311 Continuous Rotation RC Servo motor, Mounting plate to mount servo on your contraption, Horn plates to attach Servo axis to your contraptions, Mounting hardware (screws etc) and instructions.
The kit does not include blue pins as shown in the picture.
Servo motor specs:
Weight: 43 grams
Swing: Continuous Rotation
Recommended operating voltage: 4.8V
Stall Torque: 6.0v >/= 3.7kg.cm 4.8v >/= 3.0kg.cm
Operating Speed at 6.0v: 0.15sec/60°
Operating Speed at 4.8v: 0.19sec/60°
To use these Servos with your NXT, you will need NXTServo-v3
Servo User Guide
Servo dimensions matching these mounts If you consider using other servos with these mounts, ensure that they meet these dimensions within 0.2 mm tolerance.
A = 19.82mm
B = 13.47mm
C = 33.79mm
D = 10.17mm
E = 9.66mm
F = 30.22mm
G = 11.68mm
H = 26.67mm
J = 52.84mm
K = 9.35mm
L = 4.38mm
M = 39.88mm
X = 4.05mm
To use with NXT, you may need following Controller and Accessories